NF-120 Automatic Tube Filling and Sealing Machine

Twin-station tube filling, 80 to 120 tubes a minute

Two tubes are filled and sealed at every index, which is how this machine reaches 120 tubes a minute without running the mechanics any harder. Tubes feed from a large magazine, each one is lifted so the nozzle fills from the bottom up, and the nozzle blows off and cuts off the product before the tube moves on. Hot-air sealing, lot coding and tail trimming follow in line.

1. Output: 80 to 120 tubes a minute, twin station

2. Fill: 3 to 250 ml, within ±1%

3. Tubes: plastic and laminated, Ø13–50 mm, 50–250 mm long

4. Two no-tube-no-fill checks: independent, so an empty holder never gets a dose

Is the NF-120 the right size for you?

✓ Yes, if…

✕ Buy something else if…

Twin Station, Two Tubes per Index

Two tubes move into position at every index and are filled and sealed together. That’s how the output reaches 120 a minute while each station still works at a steady pace.

Filled from the Bottom Up

Each tube is lifted so the nozzle starts near the bottom, then lowered as it fills. The product doesn’t drop through air into the tube, which is what causes bubbles and splashing onto the seal area.

Blow-Off and Cut-Off at the Nozzle

When the dose is in, the tube pauses while the nozzle blows off and cuts off the product. No drip, no thread of product across the seal. The nozzle connects with a quick-release fitting, so it comes off for cleaning without leaving product behind.

Two Independent No-Tube-No-Fill Checks

Two separate sensing systems check for a tube before each dose. If either finds an empty holder, the filler doesn’t fire.

Fill Volume Fine-Tuned on the Touchscreen

Density varies a little from batch to batch, and so does the weight of a fixed volume. The fill can be trimmed from the touchscreen to bring it back on target, without stopping to adjust the pump by hand.

Technical specification

ParameterNF-120
Output80–120 tubes/min, twin station
TubesPlastic and laminated
Tube diameterØ13–50 mm
Tube length50–250 mm
Fill3–250 ml
Accuracy±1%
SealingHot air, 3 kW × 2
Main motor2.2 kW
Speed controlInverter
Power supplyThree phase, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote
Compressed air0.5–0.6 MPa, 2 m³/min
ControlsSiemens PLC, inverter and touchscreen; encoder; color-mark sensor
Contact parts316L stainless steel
Dimensions2,350 × 1,300 × 2,400 mm
Weight1,400 kg
Floor spaceAbout 4 m² for the machine, 20 m² working area
OptionsHeated hoppers (2 kW × 2), stirrers (0.18 kW × 2), double-sided coding

Model comparison

Model

Operation

Tubes

Speed

Fill

Power

NF-30 / NF-30M

Semi-automatic

Plastic / aluminum

10–30/min

5–250 ml

Single phase

NF-60A

Automatic

Plastic, laminated

up to 60/min

5–250 ml

Three phase

NF-80

Automatic

Plastic, laminated

50–75/min

5–250 ml

Three phase

NF-100

Automatic

Plastic and aluminum

80–100/min

5–180 ml

Three phase

NF-120

Automatic, twin station

Plastic and aluminum

80–120/min

5–250 ml

Three phase

Industry Applications

Typical OTC products in U.S. supplement and OTC plants:

Fluoride Toothpaste at Volume

One or two toothpaste SKUs running across shifts, where 120 tubes a minute pays back. The tube is lifted so the nozzle fills from the bottom up, which keeps air out of a thick paste.

Pain-Relief Gels and Creams

High-volume analgesic gels and creams in printed laminated tubes, where the print has to survive the seal every time.

Sunscreen Lotions

Regulated as OTC drugs in the U.S. Lotions and creams filled on two stations at once, with two independent no-tube-no-fill checks.

Boxed OTC Creams, Straight from the Filler

The filler linked to a cartoner and a shrink wrapper, so tubes go from filling to boxed without being handled.

What changing over involves

What changed

What you adjust

Roughly

Different fill

Pump setting

15–30 minutes

Different tube diameter

Tube holders

15–30 minutes

Different product

Clean the hopper and pump

15–30 minutes

What to check before you buy

01

Your tube, not a sample tube

Plastic, laminated and aluminum tubes seal in different ways. Ask any supplier to run your tube, not one of theirs.

02

Plastic or aluminum — or both?

Many semi-automatic fillers seal only one kind of tube. If you run both, ask whether that's one machine or two.

03

Your power supply

This machine needs three-phase power. Only the semi-automatic NF-30 runs on single phase — check before you choose.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Tubes Before You Order

Send us a few of your empty tubes and a sample of your product. We need your tube to size the holders and set the sealer anyway, so we fill and seal them on the machine and send them back. You’ll see the seal, the code and whether the print still looks right after the heat — on your own tube and your own product, not a sample we chose.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

NF-120 Automatic Tube Filling & Sealing Machine Comprehensive Technical FAQ

How does twin-station filling reach 120 tubes a minute?

Two tubes are indexed into position at the same time and filled and sealed together. Output doubles without the turntable or the pumps having to run twice as fast — each station works at the pace of a 60-a-minute machine.

How does the machine protect the product during hot-air sealing?

Hot air is aimed at the inside of the tube tail, where the layers need to soften and fuse. A water chiller keeps the tube holders cool, so the heat stays at the seal instead of spreading toward the product.

What happens if a tube holder is empty?

Two independent sensing systems check for a tube before the filling station. If either finds an empty holder, the filler doesn’t fire for that cycle.

How does it stop bubbles and dripping with thick products?

Each tube is lifted so the nozzle fills from near the bottom upward, which keeps air out and stops splashing. At the end of the dose the nozzle blows off and cuts off the product, so it breaks cleanly without a thread across the seal.

Can it fill aluminum tubes?

No. The NF-120 fills plastic and laminated tubes with hot-air sealing. For aluminum tubes, see the NF-80M.

Yes. The NF-120 can run on its own or be linked with an automatic cartoner and a shrink-wrapping machine to form a continuous line. Tell us which downstream machines you have and we’ll check their rates against the filler’s.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send Us an Empty Tube and a Sample

Two things decide which machine you need: whether your tubes are plastic, laminated or aluminum, because each is sealed differently, and how many you need a day. Tell us both and we’ll tell you whether a semi-automatic machine is enough.

Better still, send us a few empty tubes and a sample of your product. We’ll fill and seal them and send them back.

  • Direct from our factory
  • Lead time confirmed in your quote
  • Installation and training available
  • Spare parts listed in your quote
Scroll to Top