NF-60A Automatic Tube Filling Machine

Up to 60 tubes a minute, with tubes fed automatically from a magazine

The step from hand-loading tubes to a machine that feeds itself. Empty tubes drop from a sloping magazine into their holders, the print is turned to face forward, and each tube is filled, sealed, coded and trimmed — up to 60 a minute with one operator keeping the magazine full. For plastic and laminated tubes; the NF-60A-M is the aluminum version.

1. Output: up to 60 tubes a minute

2. Automatic tube feeding: tubes drop from a sloping magazine, no hand-loading

3. Tubes: plastic and laminated, Ø13–50 mm, 50–210 mm long

4. Fill: 5 to 250 ml, within ±1%

Is the NF-60A the right size for you?

✓ Yes, if…

✕ Buy something else if…

Tubes Fed from a Sloping Magazine

Empty tubes are loaded into an inclined magazine and drop into their holders one at a time, at a speed you can adjust. One operator keeps the magazine full rather than placing every tube.

Print Turned to the Front Before Filling

A color-mark sensor finds the printed eye-mark on each tube and turns it to face the right way, so every sealed tail lines up with the front of the tube.

Hot Air on the Inside of the Tube

Plastic and laminated tubes are sealed with hot air blown onto the inside of the tail, then pressed flat. The printed outside isn’t scorched.

Seal, Code and Trim

The lot number is stamped into the seal and the tail is trimmed square before the tube is discharged.

Technical specification

ParameterNF-60A (plastic, laminated)NF-60A-M (aluminum)
Outputup to 60 tubes/minup to 60 tubes/min
Fill5–250 ml5–250 ml
Accuracy±1%±1%
Tube diameterØ13–50 mmØ13–35 mm
Tube length50–210 mm50–180 mm
SealingHot air, pressed flatMechanical folding
Tube feedingSloping magazine, automaticSloping magazine, automatic
Power / airThree phase, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quoteSame
Dimensions1,800 × 800 × 1,980 mm1,800 × 850 × 1,380 mm
Weight350 kg 350 kg
OptionsWater chiller; heated, stirred hopper; feed pump; finished-tube conveyorHeated, stirred hopper; feed pump; finished-tube conveyor

Model comparison

Model

Operation

Tubes

Speed

Fill

Power

NF-30 / NF-30M

Semi-automatic

Plastic / aluminum

10–30/min

5–250 ml

Single phase

NF-60A

Automatic

Plastic, laminated

up to 60/min

5–250 ml

Three phase

NF-80

Automatic

Plastic, laminated

50–75/min

5–250 ml

Three phase

NF-100

Automatic

Plastic and aluminum

80–100/min

5–180 ml

Three phase

NF-120

Automatic, twin station

Plastic and aluminum

80–120/min

5–250 ml

Three phase

Industry Applications

Typical OTC products in U.S. supplement and OTC plants:

Antifungal Creams

Athlete’s foot and other OTC antifungal creams in printed laminated tubes, where the print has to line up with the seal on every tube.

Topical Pain-Relief Gels

Menthol and analgesic gels for muscle and joint pain, filled at up to 60 tubes a minute once hand-loading is the limit.

First-Aid Burn Gels

Clear gels in small plastic tubes for first-aid kits and retail.

Antibiotic Ointments in Aluminum Tubes

Ointments that need a full barrier against air and light, folded rather than heat-sealed on the NF-60A-M.

What changing over involves

What changed

What you adjust

Roughly

Different fill

Pump setting

15–30 minutes

Different tube diameter

Tube holders

15–30 minutes

Different product

Clean the hopper and pump

15–30 minutes

What to check before you buy

01

Your tube, not a sample tube

Plastic, laminated and aluminum tubes seal in different ways. Ask any supplier to run your tube, not one of theirs.

02

Plastic or aluminum — or both?

Many semi-automatic fillers seal only one kind of tube. If you run both, ask whether that's one machine or two.

03

Your power supply

This machine needs three-phase power. Only the semi-automatic NF-30 runs on single phase — check before you choose.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Tubes Before You Order

Send us a few of your empty tubes and a sample of your product. We need your tube to size the holders and set the sealer anyway, so we fill and seal them on the machine and send them back. You’ll see the seal, the code and whether the print still looks right after the heat — on your own tube and your own product, not a sample we chose.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

NF-60A Automatic Tube Filling Machine Comprehensive Technical FAQ

Why go automatic rather than semi-automatic?

Because loading tubes by hand is the slow part. On the NF-60A, tubes drop from a sloping magazine into their holders, the print is turned to the front, and the machine fills, seals, codes and trims them. One operator keeps the magazine full, at up to 60 tubes a minute.

What happens if a tube holder is empty?

A photoelectric sensor checks each holder before the filling station. If a tube misfed from the magazine or didn’t seat, the filler doesn’t fire for that cycle, so no product lands on the machine.

How does it handle thick products that string or drip from the nozzle?

Thick creams and ointments tend to leave a thread of product behind when the nozzle lifts away, and that thread lands where the seal will be. A cut-off nozzle blows off and cuts off the product at the end of each dose, so the break is clean and the seal area stays clear.

Does the hot-air sealer need a water chiller?

A plastic tube is sealed by heating the inside of its tail until the layers soften and fuse. A water chiller, available as an option, keeps the tube holders cool while that happens, so the heat stays at the seal instead of spreading toward the product.

Does the NF-60A fill aluminum tubes?

No. The NF-60A fills plastic and laminated tubes and seals them with hot air. Aluminum tubes are folded rather than heat-sealed, and that’s a separate machine — the NF-60A-M.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send Us an Empty Tube and a Sample

Two things decide which machine you need: whether your tubes are plastic, laminated or aluminum, because each is sealed differently, and how many you need a day. Tell us both and we’ll tell you whether a semi-automatic machine is enough.

Better still, send us a few empty tubes and a sample of your product. We’ll fill and seal them and send them back.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top