Liquid Capsule Filling and Sealing Machines

Fill oils and suspensions into hard capsules, seal each one with a gelatin band and dry it upright, on one linked line. Send us your liquid and we’ll run it before you order.

Why Choose AIPAK Liquid Encapsulation Technology?

Precision Ceramic Dosing

Precision Ceramic Dosing

Servo-driven ceramic pumps dose each capsule to ±2%, which matters when your oil or extract is expensive.

Tamper-Evident Banding

Tamper-Evident Banding

Two band wheels apply a gelatin band over the joint between cap and body, so the liquid stays sealed inside and any tampering shows.

Versatile Multi-Phase Filling

Versatile Multi-Phase Filling

Empower your R&D with the ability to fill not just single liquids, but complex combinations such as Liquid + Pellets, Liquid + Tablets, or Liquid + Small Capsules within a single cycle.

Intelligent Protection

Intelligent Protection

Fiber-optic sensors check every capsule before dosing. If a capsule is missing or hasn’t separated, the pump skips that cycle, so liquid doesn’t end up on the turntable.

Enclosed Turntable

Maintenance-Free Turntable

The 10-station turntable is fully enclosed, with seals that keep oil and dust out of the drive. Your quote lists the wear parts and how often to change them.

Industries We Serve

Liquid-filled hard capsules for supplement and OTC brands.

OTC Liquid-Fill Capsules
Nutraceuticals
Plant-Based Capsules

Explore Our Liquid Filling & Sealing Series

Intended Use

These machines are sold for the lawful manufacture of dietary supplements and pharmaceutical products. Buyers are responsible for meeting the laws that apply to them, including the U.S. import declaration described in the FAQ below.

Ready to Optimize Your Production?

Talk to our experts to discover the right solution for your needs.

Documentation & Selection Support

Verify our quality standards and simplify your procurement process with our official technical documentation.

Product Portfolio1

Product Portfolio

Explore technical specifications for our complete range of liquid filling and sealing linkage lines.
Quality Assurance

Quality Assurance

CE Declaration of Conformity for the NJY and NJYF series.
Technical Standards

Patents

Patent records for our liquid capsule filling and sealing machines.

FAQs on Liquid Capsule Filling Machine

Can your machines handle high-viscosity oils and complex suspensions?

Yes, within limits. The ceramic pumps handle thin oils through to thick suspensions, and fill accuracy is ±2%. Very thick fills may need heating or a slower speed, so send us a sample and we’ll run it before you order.

How is the turntable protected from oil and dust?

The 10-station turntable is one enclosed piece with dual-lip seals, so oil and powder can’t get into the drive. Your quote lists the wear parts and how often to change them.

What prevents the machine from filling a capsule that hasn't separated?

We use a high-speed fiber-optic detection system that performs non-contact inspection of every capsule before it reaches the dosing station. If the system identifies an unseparated or damaged capsule, it triggers an intelligent “No Capsule, No Fill” logic, suspending the pump for that specific cycle to prevent liquid waste and turntable contamination.

How well does the band hold up in shipping?

Two band wheels apply a gelatin band all the way around the joint. The capsules then dry upright in hanging molds, so the band sets before anything touches it. Send us your fill and we’ll band a batch so you can test it yourself.

Can I fill both liquid and solid components into the same capsule?

Yes, on the NJYF-300C. The 5th station of the rotary table can be configured for mixed filling, allowing you to combine Liquid + Pellets, Liquid + Tablets, or even Liquid + Small Capsules within a single hard capsule shell.

What are the product-contact parts made of?

The dosing components — metering rod, steering valve and plunger — are industrial ceramic, chosen because ceramic holds a microscopically tight fit without a rubber seal, does not swell or expand thermally, and is chemically inert to oils, solvents and active ingredients. Remaining contact surfaces are 316L stainless steel. Material certificates are supplied with every machine.

Do I have to declare a liquid capsule filling machine when importing to the U.S.?

Yes. Under U.S. federal rules, a capsule filling machine counts as an encapsulating machine, and its import must be declared to the DEA on Form 452 before it arrives. We supply the machine details you need for the filing. Confirm the exact requirements with your customs broker.

The Ultimate Liquid Capsule Filling Machine Guide: Optimizing Precision Dosing, Gelatin Banding, and Hermetic Containment for Solid Dosage Lines

If a liquid capsule filling and sealing process suffers from imprecise volumetric dosing, hermetic seal failures, or surface contamination,the final product will face leakage risks and costly batch rejections.

To prevent this, supplement and OTC manufacturers need liquid capsule filling machines with precise ceramic pumps and a reliable gelatin banding system. This guide covers how the machines work, how the band seals the capsule, and what to check before you buy.

Table of Contents

1: What Are the Primary Mechanical Principles of Liquid Capsule Filling and Sealing?

NJYF-300C Automatic Hard

AIPAK’s Liquid Capsule Filling and Sealing Machine

The liquid capsule filling machine process requires specialized primary mechanical principles. The reason is the safety of materials packed in the hard shell. As compared to the standard capsule filling process, the liquid capsule filling machine working is based on precise ceramic pumps and servo drivers.

These parameters swiftly drive the filling process without chances of liquid drips and dose variation. We always recommend the advanced system for encapsulation of certain materials such as oils, suspensions, and herbal extracts.

The working principle of liquid filling machine is based on multistage processing. For instance,

Working Steps of Liquid Capsule Filling Machine

Working Steps of Liquid Capsule Filling Machine

Precise Orientation

A vertical alignment of empty capsules takes place with the help of rectifiers. An advanced mechanism of vacuum separation speeds up the splitting of caps from capsule bodies.

Liquid Injection

Ceramic pumps dispense an optimized volume of formulation into capsule bodies.

Capsule Joining

With the help of mechanical pin realignment, closing and locking of filled capsules occurs.

External Banding

Sealing stations create an external band on capsules. The band application is mainly made up of gelatine or HPMC that provides leakproof sealing with stable shell integrity.

2: Why Is Gelatin Banding Essential for Liquid-Filled Capsule Stability?

For small scale production

AIPAK’s Capsule Filling Machine

From an engineering perspective, gelatin banding is an important stress-mitigation process. The presence of gelatin banding counteracts the hydrostatic pressure from liquid filling around cap and body interfaces.

The low viscosity of the solution directly exerts pressure against the mechanical friction of hard capsule liquid filling. To manage this problem, expertise recommends an airtight sealing that lowers the risk of leakage, softening of the capsule shell, and cross-contamination.

Gel sealing station

AIPAK’s Capsule Filling Machine Gel Sealing System

AIPAK’s advanced capsule filling machine features a servo-driven ribbon wheel that utilizes a polymer gel band across the joint. The machine efficiently transforms a standard capsule into a hermetic capsule.

The final result delivered from the technical solution would be leakproof, tamper-evident capsules that directly prevent the formulation from external physical factors such as oxidation, moisture ingress, etc. Therefore, the fluid present inside liquid capsule sealing would be very effective and structurally stable during storage and distribution.

3: How Do High-Precision Ceramic Pumps Ensure Dosing Consistency Across Batches?

High Precision Ceramic Pumps Capsule Filling Machine

AIPAK’s High Precision Ceramic Pumps Capsule Filling Machine

The liquid capsule filling machine is designed with ceramic pumps that are extremely stable. It gives high-precision liquid filling accuracy (± 1–2%) with positive displacement engineering parameters. AIPAK machines use ceramic pumps.

The standard capsule filling machine pumps are often featured with stainless steel. But in this case, our expertise recommends going for ceramic pumps as they ensure a permanent microscopically tight fit without the need for a rubber seal. This gives three benefits: very little wear, no rubber seals in contact with your formulation, and no thermal expansion during operation.

The capsule filling liquid ceramic pumps are coupled with an advanced servo-driven system prevent cavity induced outgassing. This reduces dose inaccuracies from air entrapments and ensures a smooth, precise liquid dose throughout the production.

4: What Drying Mechanisms Prevent Deformation During the Post-Sealing Phase?

A freshly banded capsule is mechanically fragile. The band is still wet, the shell has absorbed some moisture from the glue, and the liquid inside exerts pressure on a joint that has not yet set. How the capsule is held during those first minutes decides whether the band cures into a hermetic seal or into a leak.

Capsule drying

AIPAK’s Capsule Filling and Sealing Machine Free Hanging Drying Template

Orientation matters more than airflow. In our linkage lines, sealed capsules transfer into free-hanging drying moulds that travel a serpentine path through the drying chamber. Each capsule stays face-up for the entire cycle. Nothing rolls, nothing tumbles, and nothing stacks — so the wet band never contacts another capsule or a tray surface before it sets. Tumbling systems, borrowed from softgel production, work well for a fully formed shell but are the wrong choice for a capsule whose seal is still curing.

Ambient conditions are part of the specification, not a suggestion. The drying area should sit at around 20 °C with relative humidity between 40% and 55%. Too dry and the shell gives up moisture faster than the band cures, leaving it brittle. Too humid and the band stays tacky, the shell softens, and capsules deform under their own fill weight. If your facility cannot hold that window, tell us before the machine is specified — it changes what we recommend.

Discharge is where residue happens. At the end of the path, a 12-segment indexing ring locks each free-hanging mould into a fixed position and rotates it a full 360 degrees to release the capsules. Six air-blowing pipes clear anything that would otherwise stay lodged in a mould cavity. On the higher-output line, that becomes eight pipes. This sounds like a small detail until you have to hand-pick capsules out of moulds at the end of every shift.

5: What Does Cleaning and Changeover Actually Involve on a Liquid Capsule Line?

High Fiber Optic Inspection System

AIPAK’s High Fiber Optic Inspection System

Cleaning a liquid capsule line is not one procedure but two, running on different clocks.

Every shift: the upper and lower moulds, transfer tray, capsule storage tubes and rollers, finished-product hopper, and the banding rollers, scrapers and glue reservoir. Moulds are brushed through with 75% ethanol; the glue-contact parts are washed with hot water to remove residual adhesive, rinsed with purified water, then sanitised with ethanol. Residual glue is the single most common cause of banding defects on the following shift.

Every five to seven shifts: chain plates and guards, drying moulds, the alignment and horizontal fork plates, and the capsule hopper. Drying moulds soak in ethanol for around fifteen minutes before wiping.

Whenever the product changes, or after a shutdown of more than two days: the ceramic pump and the material hopper, without exception.

The ceramic pump has four hard rules. No fluorine-containing solutions — they attack the stainless steel components. Never pull the ceramic dosing rod or steering valve while they sit in water above 40 °C; remove the steering valve and clean it separately. Never interchange a ceramic rod with a ceramic plug between pumps. If yellow staining appears where the pump body contacts the formulation, soak in 10% oxalic acid for half an hour to an hour, then rinse with water for injection.

Sensors are wiped with ethanol on a cloth and never washed with water.

We supply this procedure as a written SOP with the machine, part by part, with the cleaning interval for each, so your QA team doesn’t have to reconstruct it.

6: How to Assess the Price-Performance Trade-off for Commercial Procurement?

Capsule Filling Machine-1

AIPAK’s Capsule Filling Machine

When buying a liquid capsule filling machine, opting for the lowest upfront cost is not a good choice. AIPAK’s procurement team always provides Total Cost of Ownsership included with installation, documentation, maintenance, and customer support throughout the machine’s lifecycle.

While initial capital expenditure is less for low-cost machines, it won’t promise consistency or high operational quality. The automatic liquid capsule filling machine price is higher against long-term ROI, such as low labor cost, low batch rejection, low product variation, and high output.

With AIPAK liquid capsule filling machine factory, you can avail a high-performance filling system for high-value liquid products. Our automatic liquid capsule filling machine has an automatic detection system with a ceramic pump that adopts controlled loading amounts to minimize ±2% loading difference with minimized product loss.

Choosing a reputable factory is not just a journey for equipment but for long-term expertise support. You will face fewer challenges, less operational risk, and more profitable machinery lifecycles.

Conclusion:

In high commercial production lines, the goal of solid dosage processing should not be approaching cheap machinery. The goal is to invest in more reliable equipment from a supplier who can support good return on investment and a smart liquid capsule filling machine. For technical directors who’re looking for automated precision-engineered systems, partnering with AIPAK ‘s powder and liquid engineering team can optimize your production line. Send us your fill and we’ll run it on the machine, so you see the fill weights and the banded capsules before you decide. Submit your product’s basic specifications to obtain a free line layout audit today.

Interested in a liquid capsule filling machine?

NJYF-300C Fully Automatic Liquid Capsule Filling and Sealing Linkage Line
Talk to our experts to discover the right solution for your needs.
Scroll to Top