APC-A160 Automatic Bottle Unscrambler — 60 to 160 Bottles/Min

Mechanical orientation for 50–300 ml round bottles, with no compressed air

Someone on your line is standing at the conveyor putting bottles the right way up, all shift. This machine takes that job over. It orients 50 to 300 ml round bottles at 60 to 160 a minute, the top of our range for round containers.

  • Output — 60 to 160 bottles per minute, the top of our range for round bottles

  • Bottle volume— 50 to 300 ml, which covers most supplement containers
  • No compressed air— orientation is mechanical, one less utility at the head of your line
  • Footprint— 1,050 × 1,150 mm, 300 kg

Is this the right machine for you?

✓ Yes, if…

✕ Look elsewhere if…

Mechanical Bottle Reversing

Bottles arriving upside-down are turned neck-up by a mechanical reversing mechanism rather than an air jet. Fewer utilities to connect at the head of the line, nothing to clog, and no air consumption added to your line’s total. For conventional round bottles this handles orientation reliably at full speed.

Bottle-Collecting Buffer

A collecting device holds a short buffer of oriented bottles ahead of the conveyor. When the counting machine pauses for a bottle change or a brief stop, the unscrambler doesn’t have to stop and restart with it. The buffer absorbs the gap and the line keeps its rhythm.

Outlet Quantity Control and Overload Protection

Detection at the bottle outlet regulates output to match what the line is consuming, rather than overrunning it. If a bottle jams, overload protection stops the machine instead of forcing bottles through — which protects the bottles as much as the drive.

304 Stainless Steel, No Dead Corners

Frame and body are 304 stainless steel, structured so there are no dead corners where dust or debris can collect. The machine washes down without disassembly.

Technical specification

Specification

APC-A160

What it means for you

Output

60 – 160 bottles/min

The top of our range for round bottles, shared with the APC-A160B

Bottle volume

50 – 300 ml

Covers 60, 100, 120 and 250 ml supplement bottles

Bottle shape

Round

Square or irregular? See the APC-2000

Bottle material

Plastic

Glass needs the APC-SP1

Orientation

Mechanical bottle-reversing mechanism

No air jet to clog or maintain

Outlet control

Quantity detection with overload protection

Feeds at the rate your line consumes

Power

0.15 kW, 60 Hz

Built to your U.S. supply. We confirm the voltage with your quote

Compressed air

Not required

One less utility at the head of your line

Dimensions

1,050 × 1,150 × 1,250 mm

Add clearance for hopper loading and cleaning

Weight

300 kg

No special foundation

Construction

304 stainless steel

Frame and body, no dead corners

Model comparison

Model

Bottle volume

Output

Bottle shape

Air

Best for

APC-SP1

15–750 ml

20–80/min

Round, square, flat-square

No

Glass bottles, large containers, frequent bottle changes

APC-A100

15–150 ml

30–100/min

Round

No

Small supplement and dispensing bottles

APC-A160

50–300 ml

60–160/min

Round

No

Standard supplement bottles, highest throughput

APC-A160B

50–300 ml

60–160/min

Round

Yes

Same range and speed, with air-assisted orientation

APC-2000

15–500 ml

40–150/min

Round, square, flat, irregular

Yes

Square and irregular plastic bottles

Start with your bottle, not with speed. Volume sets the shortlist; shape can rule out four of the five; and whether it’s glass decides the question before either.

Note that the APC-2000 is rated below the APC-A160 despite being the more capable machine. That’s because its range covers mixed bottle shapes, not because it’s the slower unit on round containers.

Ideal Applications & Industries

Supplement bottles, 60 to 250 ml

The most common container on a counting line. Round HDPE or PET, 30 to 120 count, and squarely in this machine’s range.

Protein and sports nutrition bottles

Larger containers at the top of the range, 250 to 300 ml. Check the neck diameter as well as the volume — a wide-mouth bottle at 300 ml behaves differently from a narrow one.

Gummy and chewable jars

Wide-mouth jars are heavier and sit lower than a standard bottle. They orient reliably here, but tell us the jar shape — a very wide base changes how it rides on the disc.

Contract packing

Bottle changeover is adjustment rather than a parts change, which matters when you switch between clients’ containers several times a week.

Where This Machine Sits on Your Line

SEVEN STATIONS, ONE LINE

Station 1

Bottle Unscrambler

Orients bottles neck-up and feeds them onto the conveyor.

Station 2

Bottle Air Cleaner

Ionized air removes static; vacuum draws out dust before filling.

Station 3

Counting Machine

Counts and fills. Sets the pace of the whole line.

Station 4

Desiccant or Cotton Inserter

Adds moisture control or fill material on top of the product.

Station 5

Capping Machine

Applies and torques the cap; rejects crooked and reversed caps.

Station 6

Induction Sealer

Bonds the foil liner to the bottle mouth.

Station 7

Labeler

Applies the label and discharges the finished bottle.

The unscrambler feeds the line, but the counting machine sets its pace. A mid-speed line runs 40 to 100 bottles per minute; a high-speed line runs 70 to 160. Both fit in under 30 m² with roughly three operators and a single compressed air supply.

You do not need to buy the whole line at once. Most customers start with the counting machine and add stations as volume grows — the counter is the one machine that has to be right from the start, because everything else is timed to it.

What changing over involves

Bottle size changes are an adjustment, not a parts change

What changed

What you adjust

Roughly

Same bottle, different product

Nothing on this machine

—

Bottle diameter or height changes

Guides and the outlet, by hand

15–30 minutes

Bottle shape changes entirely

Different machine, not a changeover

—

There are no change parts to buy per bottle size, and none to store on a shelf.

One honest note: this is the unscrambler. On a full line the guide rails, the capping chuck and the label recipe all change too — four jobs at four stations. Ask us for the line number, not just this one.

What to check before you buy

01

Whether anyone has run your bottle

Round is not one shape. A slight taper, an oval cross-section, or a molding seam all change how a bottle behaves against the disc. Ask any supplier to run your actual bottle before you order — not a bottle like yours.

02

The manual

A clear English manual gets your operator running in a week instead of a month. Ask to see a sample page before you order.

03

Installation and training

Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra — the answer varies more between suppliers than the machine price does.

Why buy from us?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Bottle Before You Order

Send us your bottles and we’ll run them on the machine and send you the video. You decide whether to talk quotes after that.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Deep Dive FAQ

What bottle sizes does this handle?

50 to 300 ml round bottles. Below 50 ml, the APC-A100 covers 15 to 150. Above 300, the APC-SP1 covers up to 750 at lower speed.

Does it need compressed air?

No. Orientation is mechanical. If you want air-assisted orientation for a lower misfeed rate, the APC-A160B adds an air jet at the transfer point — same speed, same bottle range.

Can I run glass bottles?

Automatic unscramblers orient bottles by centrifugal motion against the disc wall, which chips and scuffs glass over a production run. For glass we supply the APC-SP1, where the operator places bottles neck-up and no tumbling happens.

How does it synchronize with the counting machine?

Detection at the bottle outlet regulates output to match what the line is consuming. Combined with the collecting buffer, bottles arrive at the counter infeed at a steady rate rather than surging and starving.

What happens if a bottle jams?

Overload protection stops the machine rather than forcing bottles through. Clearing a jam is manual, but the machine won’t damage bottles or the drive trying to push past one.

How long does a bottle changeover take?

Changeover is adjustment rather than a parts change — the guides and the outlet are repositioned for the new diameter and height.

Can I add this to an existing line?

Yes. It installs at the head of the line and needs 0.15 kW of power, built to your U.S. supply, and 1,050 × 1,150 mm of floor plus clearance. No air and no cooling water.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Do your machines meet U.S. electrical certification requirements?

Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.

Customers Also Interested In...

Not sure which model?

Tell us your bottle volume and shape. We’ll tell you which one, and why.
Send us a sample bottle
We run it on the machine before you order and send you the result. Round is not one shape — a taper or a seam changes how it behaves.
Send your floor dimensions
Length, width, height, and where the doors and columns are. We’ll lay out your line and check the space for free.

Reply within one business day. Send us a sample bottle and we’ll run it before quoting.

Scroll to Top