APK-SP500 Strip Packing Machine — Full Servo, 500 mm Film

A servo motion controller runs feeding, embossing, printing and cutting

The only machine in the range where every station runs on servo. A motion controller drives the feeding, the lengthwise and crosswise embossing, the batch printing and the cutting, with drum speed from 6 to 20 rpm. 500 mm of film, 1,400 kg.

1. Full servo: a motion controller runs feeding, embossing, batch printing and cutting

2. Drum speed: 6 to 20 rpm, the widest range in the series

3. Film width: 500 mm, for the most lanes across the rollers

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Technical specification

Feature

APK-SP500

What it means for you

Drum speed

6–20 rpm, stepless

Set through the motion controller

Output

Depends on tablet size and layout

Tell us both and we’ll give you the number

Film width

500 mm

The widest in the series

Alu-plastic laminate

0.08–0.10 × 500 mm

Soft Alu-Alu strip

Medical PVC

0.05–0.10 × 500 mm

For plastic-plastic strips

Reel core

70–75 mm

—

Heating

1.5 kW × 2

One per sealing roller

Servo motor

1 kW

—

Control

Servo motion controller

Feeding, embossing, printing and cutting all on servo

Air

≥0.1 m³/min

—

Power supply

60 Hz

Built to your U.S. supply. We confirm the voltage with your quote

Dimensions

1,860 × 1,170 × 2,300 mm

—

Weight

1,400 kg

—

 

Model comparison

Model

Film width

Drum speed

Cutting

Output

Heating

APK-SP220

220 mm

7–14 rpm

Air cylinder

20,000–60,000 pcs/h

1.5 kW × 2

APK-SP300

300 mm

7–14 rpm

Servo

20,000–80,000 pcs/h

1.2 kW × 2

APK-SP400

400 mm

7–14 rpm

Servo

20,000–120,000 pcs/h

1.5 kW × 2

APK-SP500

500 mm

6–20 rpm

Full servo, motion controller

Depends on layout

1.5 kW × 2

The film width sets how many lanes fit across the rollers. The cutting drive sets how easily you change strip layout. Output depends on both — and on your tablet size — so tell us your tablet and your strip layout and we’ll give you your number, not the headline one.

Full-Servo Motion Synchronization

Feeding, the lengthwise and crosswise embossing, batch printing and cutting each run on servo, coordinated by one motion controller. There’s no chain or cam linking the stations, so there’s less to wear and less to re-time.

Layout Changes on the Screen

Changing strip layout is a set of numbers on the screen, not an adjustment on the machine. A different tablet size is still a roller change — the pocket is cut into the sealing rollers.

Heated Rollers, Controlled Separately

Each sealing roller has its own 1.5 kW heater and its own temperature controller, so the seal stays even across all 500 mm. When you switch between Alu-Alu and plastic-plastic, you set the temperature to suit the material.

Vibratory Feeding with Broken-Tablet Screening

Tablets are fed from a vibrating hopper through a screen that separates broken pieces and powder before they reach the rollers. A fragment sealed into the margin is what causes a leak, so this step matters more than it looks.

Industry Applications

Where this machine is used:

Effervescent tablets

The textbook case for Alu-Alu strips. An effervescent tablet starts reacting the moment it picks up moisture, and foil on both faces keeps it out.

Probiotic and moisture-sensitive capsules

Where the moisture barrier is the shelf life. Each capsule is sealed in its own pocket, so opening one doesn’t expose the rest.

Light-sensitive vitamins and botanicals

Foil on both faces blocks light completely — something a clear blister can’t do.

Lozenges and compressed candies

Flat strips that fit a pocket or a wallet, sealed without the tablet surface touching a forming die.

What changing over involves

Strip length is a screen setting. Tablet size is a roller change.

What changed

What you adjust

Roughly

Strip length or cut position

Cutting stroke on the touchscreen

A few minutes

New foil roll, same size

Change the reel

A few minutes

Tablet size or shape

Sealing roller dies and feeder parts

15–30 minutes

Alu-Alu → plastic-plastic

Foil and temperature settings

15–30 minutes

The pocket is cut into the heated sealing rollers, so a different tablet means a different roller set. An extra set of rollers and feeder change parts are both options you can order with the machine.

What to check before you buy

01

The roller dies, not the machine

The pocket is machined into the heated sealing rollers. Ask who designs it around your tablet, how long a new set takes, and what it costs — that's where a strip project succeeds or fails.

02

The manual

A clear English manual gets your operator running in a week instead of a month. Ask to see a sample page before you order.

03

Installation and training

Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

Roller Dies Designed Around Your Tablet

Send us a few samples and tell us your strip layout. We design the pocket and the layout around your tablet before you order.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Questions About the APK-SP500

What's the difference between the SP400 and the SP500?

On the SP400 the cutter runs on servo. On the SP500 everything does — feeding, embossing, batch printing and cutting, coordinated by one motion controller — with a drum speed range of 6 to 20 rpm and a 500 mm film. If you rarely change layout, the SP400 does the job for less.

How does a full servo-motion framework reduce operational maintenance costs over long campaigns?

Chains and cams stretch and wear, and the stations drift out of time with each other until someone re-times them. With each station on its own servo, timing is set in the controller rather than by mechanical linkage, so there’s less to wear and less to re-time.

How does it keep the seal even across 500 mm?

Each sealing roller has its own heater and its own temperature controller. If one roller drifts, its controller corrects it without touching the other, which is what keeps the seal even across the width and through a long run.

What options can I add?

An extra set of roller dies, feeder change parts, one-side or two-side eye-mark registration for printed foil, and a detection and reject system for missing tablets. Tell us which you need at the quotation stage.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your tablet and your strip layout

Tablet size decides the roller dies. Strip layout — 2 × 4, 2 × 10, whatever your carton holds — decides the cutting and the lane count. Send us a few samples and tell us the layout, and we’ll tell you which width you need and what it will actually produce.

  • Reply within one business day
  • Roller pocket designed from your samples
  • Your product specs stay with us
Scroll to Top