APK-SP300 Strip Packing Machine — 20,000 to 80,000 Tablets an Hour
Soft Alu-Alu heated-roller sealing, 300 mm film, servo cutting
Your tablets need a full light and moisture barrier, and a PVC blister doesn’t give you one. This machine seals each tablet between two soft aluminium foils on heated rollers — no pocket is formed, nothing is stretched thin. 300 mm of film, servo-controlled cutting, 20,000 to 80,000 tablets an hour depending on your layout.
1. Output: 20,000 to 80,000 tablets an hour, depending on tablet size and layout
2. Film width: 300 mm
3. Cutting: servo-controlled, so strip length is set on the touchscreen
4. Foil: soft Alu-Alu 0.08–0.10 mm, or plastic-plastic 0.05–0.10 mm
Is this the right machine for you?
✓ Yes, if…
- Your tablets need a full light and moisture barrier
- You pack tablets, capsules or lozenges into flat strips
- You need 20,000 to 80,000 tablets an hour
- You change strip length between SKUs — the cut is set on screen
✕ Buy something else if…
- You want customers to see the tablet → a clear PVC blister does that; a foil strip doesn't
- You need more than 80,000 an hour → the SP400 takes a 400 mm film, same servo cutting
- You only run one layout and want the lowest cost → the SP220 uses an air cylinder for cutting instead of a servo
- Your product is a liquid or a gel → this machine packs solid doses only
Technical specification
Feature | APK-SP300 | What it means for you |
Drum speed | 7–14 rpm, stepless | Set on the touchscreen |
Output | 20,000–80,000 pcs/h | Depends on tablet size and how many lanes fit |
Film width | 300 mm | Can be built to your layout |
Alu-plastic laminate | 0.08–0.10 × 300 mm | Soft Alu-Alu strip |
Medical PVC | 0.05–0.10 × 300 mm | For plastic-plastic strips |
Reel core | 70–75 mm | — |
Heating | 1.2 kW × 2 | One per sealing roller |
Main motor | 1.1 kW | — |
Cutting | Servo | Strip length changes on screen |
Air | 0.4–0.6 MPa, ≥0.1 m³/min | — |
Power supply | 60 Hz | Built to your U.S. supply. We confirm the voltage with your quote |
Dimensions | 1500×850×1670 | — |
Weight | 950 kg | — |
Controls | Siemens PLC, Siemens touchscreen, Siemens V20 drive | Parts you can source in North America |
Model comparison
Model | Film width | Drum speed | Cutting | Output | Heating |
APK-SP220 | 220 mm | 7–14 rpm | Air cylinder | 20,000–60,000 pcs/h | 1.5 kW × 2 |
APK-SP300 | 300 mm | 7–14 rpm | Servo | 20,000–80,000 pcs/h | 1.2 kW × 2 |
APK-SP400 | 400 mm | 7–14 rpm | Servo | 20,000–120,000 pcs/h | 1.5 kW × 2 |
APK-SP500 | 500 mm | 6–20 rpm | Full servo, motion controller | Depends on layout | 1.5 kW × 2 |
The film width sets how many lanes fit across the rollers. The cutting drive sets how easily you change strip layout. Output depends on both — and on your tablet size — so tell us your tablet and your strip layout and we’ll give you your number, not the headline one.
Sealed Flat, Not Formed
A blister machine heats plastic and stretches it into a pocket. This machine doesn’t form anything. The tablet sits between two soft aluminium foils, and heated rollers press the foils together around it. Nothing is stretched thin, so the barrier is the full thickness of the foil on both faces.
Servo-Controlled Cutting
The cut is driven by a servo, not an air cylinder. That means you set the strip length and cutting stroke on the touchscreen when you change SKU, instead of adjusting the cutter by hand. It’s the main difference between this machine and the SP220.
Vibratory Feeding with Broken-Tablet Screening
Tablets are fed from a vibrating hopper, and broken pieces are screened out before they reach the rollers. A fragment sealed into the margin is what causes a leak, so this step matters more than it looks.
Heated Rollers, Controlled Separately
Each sealing roller has its own 1.2 kW heater and its own temperature controller. When you switch between Alu-Alu and plastic-plastic, you set the temperature to suit the material rather than running both at one setting.
Batch Printing and Scrap Rewind
Batch numbers are stamped by steel type during the run. The trimmed foil edge rewinds onto its own reel instead of piling up under the machine.
Industry Applications
Where this machine is used:
Effervescent tablets
The textbook case for Alu-Alu strips. An effervescent tablet starts reacting the moment it picks up moisture, and foil on both faces keeps it out.
Probiotic and moisture-sensitive capsules
Where the moisture barrier is the shelf life. Each capsule is sealed in its own pocket, so opening one doesn’t expose the rest.
Light-sensitive vitamins and botanicals
Foil on both faces blocks light completely — something a clear blister can’t do.
Lozenges and compressed candies
Flat strips that fit a pocket or a wallet, sealed without the tablet surface touching a forming die.
What changing over involves
Strip length is a screen setting. Tablet size is a roller change.
What changed | What you adjust | Roughly |
Strip length or cut position | Cutting stroke on the touchscreen | A few minutes |
New foil roll, same size | Change the reel | A few minutes |
Tablet size or shape | Sealing roller dies and feeder parts | 15–30 minutes |
Alu-Alu → plastic-plastic | Foil and temperature settings | 15–30 minutes |
The pocket is cut into the heated sealing rollers, so a different tablet means a different roller set. An extra set of rollers and feeder change parts are both options you can order with the machine.
What to check before you buy
The roller dies, not the machine
The pocket is machined into the heated sealing rollers. Ask who designs it around your tablet, how long a new set takes, and what it costs — that's where a strip project succeeds or fails.
The manual
A clear English manual gets your operator running in a week instead of a month. Ask to see a sample page before you order.
Installation and training
Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
Roller Dies Designed Around Your Tablet
Send us a few samples and tell us your strip layout. We design the pocket and the layout around your tablet before you order.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-SP300
Two things. The SP300 takes a 300 mm film instead of 220, so more lanes fit across the rollers. And it cuts with a servo instead of an air cylinder, so you change strip length on the touchscreen. If you run one layout and never change it, the SP220 does the job for less.
Each sealing roller has its own heater and its own temperature controller. If one roller drifts, its controller corrects it without touching the other, which is what keeps the seal even across the width and through a long run.
Tablets are fed from a vibrating hopper through a screen that separates broken pieces and powder before they reach the rollers. A fragment sealed into the margin is what causes a leak, so this step matters more than it looks.
Yes. Soft Alu-Alu laminate from 0.08 to 0.10 mm for a full light and moisture barrier, or medical PVC from 0.05 to 0.10 mm when you want a plastic-plastic strip. Each roller’s temperature is set to suit the material.
An extra set of roller dies, feeder change parts, one-side or two-side eye-mark registration for printed foil, and a detection and reject system for missing tablets. Tell us which you need at the quotation stage.
Yes. The outfeed can feed a cartoner such as our WZH-120 III, so strips go straight into retail cartons. Tell us which cartoner you run, or plan to, and we’ll confirm how the two are interlocked before you order.
An Alu-Alu blister forms a pocket by cold-stretching thick aluminium foil. A strip doesn’t form anything — two soft foils are heat-sealed around the tablet on rollers. Strips use thinner foil and fold flat; blisters hold their shape and suit taller items. Both give a full light and moisture barrier.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send us your tablet and your strip layout
Tablet size decides the roller dies. Strip layout — 2 × 4, 2 × 10, whatever your carton holds — decides the cutting and the lane count. Send us a few samples and tell us the layout, and we’ll tell you which width you need and what it will actually produce.
- Reply within one business day
- Roller pocket designed from your samples
- Your product specs stay with us