Doypack Machine
Stand-Up Pouches Formed from Roll Film, for Supplement Powders and Granules
Buy film instead of printed pouches — the machine forms, fills and seals the pouch in one line.
Why Choose Our Doypack Machines?
The Pouch Is Made on the Machine
Printed film comes off a roll and is folded, punched and sealed into a stand-up pouch in line. No pouch magazine to refill, and no finished pouches to buy in.
Zipper Sealed In as the Pouch Forms
On the zipper versions, the zipper comes off its own reel with its own tension control, so it seals flat rather than puckering.
Printed Film Stays in Register
A photocell reads the mark on your printed film and corrects the servo feed, so the artwork lands in the same place on every pouch.
Sealed Hot, Then Set Cold
The top seal is made by heated jaws and then pressed by cooling jaws before the pouch leaves the machine — which is what keeps it flat.
Roll Film or Premade Pouches?
A doypack machine buys film. Printed film comes off a roll and the machine forms the stand-up pouch, fills it and seals it. Film costs less than a finished pouch, so the cost per bag comes down — but the machine is longer, and a new pouch size means new forming parts.
A premade pouch machine buys pouches. Your supplier prints and makes them; the machine opens, fills and seals them. Shorter machine, a size change is an adjustment, but every pouch costs more.
One pouch size running for weeks? Film pays off. Several sizes, or modest volumes? Buy printed pouches.
Doypack machine | Premade pouch machine | |
You buy | Film on a roll | Printed pouches |
Machine length | 4.5–10.1 m | 2.25–5.1 m |
Cost per bag | Lower | Higher |
Size change | New forming parts | An adjustment |
Best for | One size, long runs | Several sizes |
Industry Applications
Model comparison
Model | Output | Pouch width | Speed | Power | Line length |
APK-130S | Single | 60–130 mm | 35–45/min | 6 kW | 4.5 m |
APK-180S | Single | 90–180 mm | 40–60/min | 9 kW | 6.0 m |
APK-240S | Single | 100–240 mm | 40–60/min | 11 kW | 8.7 m |
APK-280DS | Twin | 90–140 mm per lane | 90–120/min | 15.5 kW | 10.1 m |
Zipper versions of the 180S, 240S and 280DS form the zipper into the pouch as it's made. Line length is the number to check first.
Four Doypack Machines
All four form the pouch from roll film. Choose by pouch width — and by whether one lane is enough.
Pouch width decides the machine. How long you run one size decides whether film pays off at all. Send us both and we’ll tell you — including when the answer is a premade pouch machine.
Documentation & Selection Support
Verify our quality standards and simplify your procurement process with our official documentation
Product Portfolio
Quality Assurance
Technical Standards
Post us your film spec and a powder sample. We’ll form, fill and seal pouches and send them back.
Doypack Machine FAQ
Start with pouch width. Up to 130 mm, the APK-130S. Up to 180 mm, the APK-180S. Up to 240 mm, the APK-240S. If your pouch is 140 mm or under and you need more than 60 a minute, the twin-output APK-280DS.
S means stand-up pouch. Z means the zipper version. D means twin output — two pouches per cycle.
Yes — all four models can punch a contour shape and a hanging hole as the pouch is formed.
A new pouch size means changing the forming parts as well as the settings, so it takes longer than on a premade pouch machine. We time a changeover on your pouch sizes during the test run, so you see it before you order.
The zipper comes off its own reel with its own tension control, and it’s sealed into the pouch as the pouch forms. Holding the tension is what keeps the zipper flat instead of puckering.
It depends on the dosing unit and your product. Our servo augers and volumetric cups hold ±0.3–1.2%. Send us a sample and we’ll tell you what to expect on yours.
Often, yes. Tell us the make and model of the weigher, auger or conveyor you already have, and we’ll confirm the mounting and the signal connection before you order.
A doypack machine if one pouch size runs for long stretches and pouch cost is a real line item — film costs less than a finished pouch. A premade pouch machine if you run several sizes. See premade pouch machines →
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
Send us your film spec and a powder sample.
Pouch width decides the machine. How long you run one size decides whether film pays off. Send us both, and we’ll form, fill and seal pouches and send them back.
- Reply within one business day
- Your film and powder run on the machine before you order
- We keep your formula and artwork confidential.